 |
Suspensão do fole do amortecedor das molas de ar M8 de SP1B04 Phoenix FS40-6
Detalhes do produto:
| Lugar de origem: | Guangzhou, China |
| Marca: | AIRSUSTECH |
| Certificação: | ISO/TS16949:2009 |
| Número do modelo: | 1B4060 |
Condições de Pagamento e Envio:
| Quantidade de ordem mínima: | 3 partes |
|---|---|
| Detalhes da embalagem: | Caixa forte da caixa ou como a exigência de clientes |
| Tempo de entrega: | 3-8 dias de trabalho |
| Termos de pagamento: | T/T, Western Union, Paypal ou outro |
| Habilidade da fonte: | 1000pcs/Week |
|
Informação detalhada |
|||
| Garantia: | 12 meses | tipo: | Mola de suspensão |
|---|---|---|---|
| Material: | Rubber+metal | Embalagem: | Caixa neutra ou como o pedido dos clientes |
| Circunstância: | 100% novo | Tipo do amortecedor: | Gás-enchido |
| Aplicação: | Mola de ar | OE NÃO.: | FS 40-6 |
| Tamanho: | 16*16*16 cm | Cor: | Preto |
| Realçar: | Molas de ar de SP1B04 Phoenix,molas de ar de M8 Phoenix,fole do amortecedor FS40-6 |
||
Descrição de produto
SP1B04 Phoenix Air Spring Refer to Contitech FS 40-6 1/8 Air Inlet M8 Metric Nuts
AIRSUSTECH 1B4060 replace SP1B04 Phoenix product description:
The air spring shock absorber AIRSUSTECH 1B4060 replace SP1B04 Phoenix can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded
• In order to press the air spring shock absorber AIRSUSTECH 1B4060 replace SP1B04 Phoenix to the minimum height, a restoring force is required. Usually, this is achieved by applying a load
• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 1B4060 replace SP1B04 Phoenix must be used to absorb the force
• Before disassembling the air spring shock absorber AIRSUSTECH 1B4060 replace SP1B04 Phoenix, the internal air must be released to prevent accidents and personal injury.
• During operation, the rubber air spring shock absorber AIRSUSTECH 1B4060 replace SP1B04 Phoenix shall not be in contact with other parts
| Bearing load Power (kg) |
Inflation pressure | 0.2MPa | 0.3MPa | 0.4MPa | 0.5MPa | 0.6MPa | 0.7MPa | 0.8MPa | 0.7MPa Volume(dm³) |
|---|---|---|---|---|---|---|---|---|---|
| Installation height | |||||||||
| 53(mm) | 230 | 341 | 448 | 559 | 681 | 793 | 915 | 0.339 | |
| 66(mm) | 180 | 277 | 366 | 468 | 560 | 656 | 750 | 0.523 | |
| 70(mm) | 159 | 251 | 337 | 422 | 511 | 601 | 690 | 0.557 | |
| 79(mm) | 146 | 225 | 297 | 369 | 438 | 519 | 587 | 0.623 | |
| 83(mm) | 120 | 177 | 253 | 294 | 357 | 417 | 489 | 0.629 | |
| 92(mm) | 69 | 103 | 138 | 174 | 214 | 253 | 296 | 0.688 | |
| Stiffness and frequency at design height | Vertical stiffness(Kg/cm) | 90 | 128 | 165 | 206 | 248 | 290 | 304 | |
| Stiffness and frequency at design height | Natural frequency Hz | 3.78 | 3.58 | 3.5 | 3.49 | 3.49 | 3.48 | 3.32 | |
| Stiffness and frequency at design height | Natural frequency cpm | 227 | 215 | 210 | 209 | 209 | 209 | 199 |
AIRSUSTECH 1B4060 Cross OEM Original Equipment Manufacturer:
AIRSUSTECH Part Number:1B4060
Contitech FS 40-6 1/8
Phoenix SP1B04
| Technical data of AIRSUSTECH 1B4060 replace SP1B04 Phoenix | |
| Min. pressure | 0 bar |
| Return force to min. height | ≤ 120 N |
| Overall weight with clamped plates | 0.9 kg |
| Vibration isolation - dynamic characteristic values of AIRSUSTECH 1B4060 replace SP1B04 Phoenix | |||||||
| Design height H: recommended 90mm, minimum 70mm | |||||||
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force (Load) [KN] | 1.7 | 2.3 | 2.8 | 3.4 | 3.8 | 4.4 | 0.5 |
| Spring rate [N/cm] | 760 | 990 | 1220 | 1480 | 1610 | 1820 | |
| Natural frequency [Hz] | 3.5 | 3.3 | 3.3 | 3.3 | 3.2 | 3.2 | |
| Pneumatic application - static characteristic values of AIRSUSTECH 1B4060 replace SP1B04 Phoenix | |||||||
| Force F [kN] | |||||||
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Height H [mm] 60 | 2.6 | 3.5 | 4.3 | 5.2 | 6.1 | 6.9 | 0.3 |
| 70 | 2.3 | 3.2 | 3.9 | 4.7 | 5.4 | 6.2 | 0.4 |
| 80 | 2.1 | 2.8 | 3.5 | 4.2 | 4.9 | 5.3 | 0.5 |
| 90 | 1.7 | 2.2 | 2.8 | 3.4 | 3.9 | 4.4 | 0.5 |
| 100 | 1.2 | 1.6 | 2 | 2.5 | 3 | 3.4 | 0.6 |
